HAVE YOUR COUPLER FOR LIFE

Our Severe Duty Multi Grab Manual Coupler allows operators to change attachments quickly without the hassle of hammering out or changing the pin.

• Only need a drive ratchet to install
• Multi-Grab. Meaning it can grab variable pin centers
• Always tight. It cinches up the slack as the pins wear.
• Low maintenance. There are no hydraulics, so you can replace it yourself.

It takes us less than two weeks to get ears cut and lugged to your machine.

Featured Videos

• 

  Loading video...
  Why Professional Metal Workers PREFER Water Jets

  Fire or water—what’s better for cutting steel? The water jet is preferred for cleaner cuts and less cleanup. It’s slower than the plasma cutter, though. Plasma cutting is faster, especially for thicker plates. The water jet requires less attention during operation. Which one would you choose? Let us know in the comments! Subscribe today and become a part of LIFCO’s journey to becoming the perfect
• 

  Loading video...
  2D vs 3D Cuts—It’s Not What You Think

  We head into the office to catch up with the team and check out some 3D cutting action on the water jet. Megan walks Sean through the difference between 2D vs. 3D cutting, explaining how 2D cuts go straight down, while 3D cuts involve angled cuts to create sharp edges or points—essential for certain blade designs or precision components. While the setup on the machine is similar, 3D cutting requir
• 

  Loading video...
  Assembling this RARE Volvo Coupler

  Manufacturing a Volvo Coupler for an excavator. In stage two, the bolt-on plate is fitted after welding the initial structure and using temporary bracing to prevent gusset distortion. Once the bracing is removed, the bolt-on plate is positioned and fully welded into place. #WeldersOfYouTube #WeldingProjects #SteelFabrication #WeldingSkills #MetalFabrication #WeldLife #WeldingSetup #excavator
• 

  Loading video...
  Senior Welder Shares Common Rookie Mistake

  Manufacturing our Volvo Coupler for an Excavator. The first time this assembly was done, welding the inside was extremely difficult due to limited access after full fit-up. To avoid this, the process is now done in three stages, allowing better access for welding and ensuring proper placement before adding the final bar. This method ensures welders can reach inside and do quality work without stru
• 

  Loading video...
  Waterjet Cutting Aluminum: "More Fun" than Steel

  In this video, we're cutting hydraulic parts in Buffalo for the first time, expanding beyond our usual attachment work. We're cutting aluminum plates to make shipping covers—starting with just a couple but quickly realizing we need over 30. As we go, we’re adjusting the cutting speed to ensure a smooth finish, since aluminum cuts faster than steel but still requires precision. Follow along as we d