P1/PD045 Pumps

     Highly customizable hydraulic pump for medium pressure (280 bar) applications. Low noise, and wide variety of controls types. Electronic controls and displacement feedbacks available. Lifco stocks the SAE units and the common service parts. Search Lifco Hydraulics P1-PD stock below:

Search Lifco Hydraulics Inventory:



Select Product Type: Units   Parts
Unit#(Click item for more)DescriptionStockPrice(USD)
P1045PS08SLM5BL00R1000000P1045PS08SLM5BL00R10000003 In Stock$1339.80
P1045PS02SRU5AL00R1000000 1 In Stock$1362.20
PD045PS02SR5AANOR120000NEW PUMP1 In StockPlease Contact Us
P1045PS08SLM5BL00E1000000 1 In Stock$1339.10
P1045PS01SRM5AL00R0000000PARKER P1045R PISTON PUMPOut Of Stock$1219.40
P1045PS01SLM5AL00R0000000P1045 - PARKER AXIAL PISTON PUMP Out Of Stock$1219.40
P1045PS08SLM5BL00E000PB00 On Order Delivery Date 11/21/2017$1285.20
P1045PS08SLM5BAM0E100PB00 On Order Delivery Date 11/21/2017$1553.30
P1045PS01SLM5BL00E1000000 Out Of Stock$1339.10
PD045PS02SRU5AC00R000000 Out Of StockPlease Contact Us
PD045PS02SRS5AAF0T00Q000002E-89892-5Out Of Stock$2421.30
PD045PS02SRS5BAM0T00A000005E-02498-5Out Of Stock$1943.20


P1/PD 045
Displacement: (CC/REV) 45
Outlet Pressure - Continuous:280 bar (4000 PSI)
Outlet Pressure - Intermittent: 320 bar (4500 PSI)
Outlet Pressure - Peak: 350 bar (5000 PSI)
P1 Max Speed: (1.3 bar abs inlet) - RPM 3100
P1 (1.0 bar abs inlet) - RPM 2800
P1 (0.8 bar abs inlet) - RPM: 2400
PD Max Speed (1.0 bar abs inlet) - RPM 1800
PD (0.8 bar abs inlet) - RPM 1800
Minimum Speed - RPM: 600
Inlet Pressure - Max: 10 bar (145 PSI)
Fluid Temperature Range: -40 to +95°C, -40 to +203°F
Fluid Viscosity – Rated, cSt: 6 to 160
Max. Intermittent - cSt (for Cold Starting): 5000
Min. Intermittent - cSt: 5
Fluid Contamination - Rated, ISO: 20/18/14
Fluid Contamination - Maximum, ISO: 21/19/16
Weight: Non Thru-Drive 24 kg (52 lb)
Weight: Thru-Drive 27 kg (59 lb)
Need Assistance?   sales@lifcohydraulics.com

P1045PS08SLM5BL00R1000000 P1045PS08SLM5BL00R1000000

Buy Direct Link:Buy Direct
Stock:3 In Stock

Application: PD45 Axial Piston Pump

     A 'very quiet' pressure compensated pump was required for use on a piece of laboratory equipment. The target sound level was below 83 dB(A) and the flow had to be 20 GPM at 4,000 PSI. This is 50 horsepower! Parker’s PD45 (2.7 cubic inch / revolution) axial piston pump held the solution. Not only does it have a cast iron housing; but, it incorporates their “Ripple Chamber” technology engineered into the side ported pump. The ripple chamber reduces pressure pulsations (called ripple) at the outlet of the pump by 40-60%. This leads to a significant reduction in overall system noise, without the added expense of noise dampening components. The pump was powered by a 1,800 RPM electric motor. At this speed the pump produces a sound level of 76 dB(A). Through the use of this pump and correct power unit construction, the customer’s expectations were met.