MENU
Lifco Hydraulics Mobile Logo


P1pump1.JPG

P1/PD018 Series

     Highly customizable hydraulic pump for medium pressure (280 bar) applications. Low noise, and wide variety of controls types. Electronic controls and displacement feedbacks available. Lifco stocks the SAE units and the common service parts. Search Lifco Hydraulics P1-PD stock below:


parkerkeepitreal.png

parkerstandard.png


Units:

Unit#(Click item for more)DescriptionStockPrice(USD)
P1018PS02SRM5BAM0E1200000 1 In StockPlease Contact Us
PD018PS01SRS5AC00E0200000PI UNITOut Of StockPlease Contact Us
P1018PS02SRM5AC00E0200000 Out Of StockPlease Contact Us
PD018PS01SRS5BAM0R0200000 Out Of StockPlease Contact Us

Parts:

Part#(Click item for more)DescriptionStockPrice(USD)
03E-94432-0PD018 Cam Bearing8 In Stock$50.00
S2E-19538-0COUPLING SAE A 9T P*018 & PIN4 In Stock$163.10
03E-94416-0PORT PLATE P1018 CCW NO RIPPLE1 In Stock$174.30
03E-94409-0SHAFT SPLINE SAE NRD 01 P*018 1 In Stock$171.50
03E-94414-0PORT PLATE PD018 CCW NO RIPPLE1 In Stock$174.30

Specifications:

P1/PD 018 P1/PD 028 P1/PD 045 P1/PD 060 P1/PD 075 P1/PD 100 P1/PD 140
Displacement: (CC/REV) 18 28 45 60 75 100 140
Outlet Pressure - Continuous: 280 bar (4000 PSI) 280 bar (4000 PSI) 280 bar (4000 PSI) 280 bar (4000 PSI) 280 bar (4000 PSI) 280 bar (4000 PSI) 280 bar (4000 PSI)
Outlet Pressure - Intermittent: 320 bar (4500 PSI) 320 bar (4500 PSI) 320 bar (4500 PSI) 320 bar (4500 PSI) 320 bar (4500 PSI) 320 bar (4500 PSI) 320 bar (4500 PSI)
Outlet Pressure - Peak: 350 bar (5000 PSI) 350 bar (5000 PSI) 350 bar (5000 PSI) 350 bar (5000 PSI) 350 bar (5000 PSI) 350 bar (5000 PSI) 350 bar (5000 PSI)
P1 Max Speed: (1.3 bar abs inlet) - RPM 3600 3400 3100 2800 2700 2500 2400
P1 (1.0 bar abs inlet) - RPM 3300 3200 2800 2500 2400 2100 2100
P1 (0.8 bar abs inlet) - RPM: 2900 2900 2400 2200 2100 1900 1800
PD Max Speed (1.0 bar abs inlet) - RPM 1800 1800 1800 1800 1800 1800 1800
PD (0.8 bar abs inlet) - RPM 1800 1800 1800 1800 1800 1800 1800
Minimum Speed - RPM: 600 600 600 600 600 600 600
Inlet Pressure - Max: 10 bar (145 PSI) 10 bar (145 PSI) 10 bar (145 PSI) 10 bar (145 PSI) 10 bar (145 PSI) 10 bar (145 PSI) 10 bar (145 PSI)
Fluid Temperature Range: -40 to +95°C, -40 to +203°F -40 to +95°C, -40 to +203°F -40 to +95°C, -40 to +203°F -40 to +95°C, -40 to +203°F -40 to +95°C, -40 to +203°F -40 to +95°C, -40 to +203°F -40 to +95°C, -40 to +203°F
Fluid Viscosity – Rated, cSt: 6 to 160 6 to 160 6 to 160 6 to 160 6 to 160 6 to 160 6 to 160
Max. Intermittent - cSt (for Cold Starting): 5000 5000 5000 5000 5000 5000 5000
Min. Intermittent - cSt: 5 5 5 5 5 5 5
Fluid Contamination - Rated, ISO: 20/18/14 20/18/14 20/18/14 20/18/14 20/18/14 20/18/14 20/18/14
Fluid Contamination - Maximum, ISO: 21/19/16 21/19/16 21/19/16 21/19/16 21/19/16 21/19/16 21/19/16
Weight: Non Thru-Drive 14.2 kg (31.3 lb) 18.1 kg (40.0 lb) 24 kg (52 lb) 30 kg (67 lb) 31 kg (68 lb) 53 kg (117 lb) 67 kg (147 lb)
Weight: Thru-Drive - - 27 kg (59 lb) 34 kg (75 lb) 35 kg (77 lb) 55 kg (121 lb) 82 kg (180 lb)
Need Assistance?   sales@lifcohydraulics.com
1-800-895-4326

P1018PS02SRM5BAM0E1200000  

Price(USD):Please Contact Us
Stock:1 In Stock

Common Units:


  • PD018PS02SLS5BC10E1200000
  • PD028PB04SRS5BC00R320PB00
  • PD140PS02SRS5BL00S100PB00
  • P1060PD02SLM5BL00E1400000
  • P1045PS01SRM5BL00R100PB00

3-D Drawings:


PD 3D Drawing
PD075
View PDF



Application: PD45 Axial Piston Pump


     A 'very quiet' pressure compensated pump was required for use on a piece of laboratory equipment. The target sound level was below 83 dB(A) and the flow had to be 20 GPM at 4,000 PSI. This is 50 horsepower! Parker’s PD45 (2.7 cubic inch / revolution) axial piston pump held the solution. Not only does it have a cast iron housing; but, it incorporates their “Ripple Chamber” technology engineered into the side ported pump. The ripple chamber reduces pressure pulsations (called ripple) at the outlet of the pump by 40-60%. This leads to a significant reduction in overall system noise, without the added expense of noise dampening components. The pump was powered by a 1,800 RPM electric motor. At this speed the pump produces a sound level of 76 dB(A). Through the use of this pump and correct power unit construction, the customer’s expectations were met.